Description
The Siemens 575332TA battery is a 3V lithium backup battery assembly intended for compatible industrial PLC and CNC controllers.
This compact assembly includes a cylindrical battery, connecting wires and a black connector. Additionally, the wired arrangement supports installation in equipment requiring a matching 575332TA battery connection.
Many replacement batteries for this reference use a 1/2AA lithium cell with a nominal capacity of approximately 950mAh. However, the exact specifications of the supplied assembly should match its verified manufacturer data.
Key Features
- 575332TA Battery Reference: Intended for compatible industrial equipment requiring this battery specification.
- 3V Nominal Voltage: Matches the voltage commonly specified for 575332TA battery assemblies.
- Lithium Battery Technology: Uses non-rechargeable primary lithium chemistry.
- Compact Cylindrical Design: Commonly uses a 1/2AA-format battery.
- Wired Connector: Includes two leads and a black connector for compatible equipment.
- Industrial Applications: Suitable for compatible PLC and CNC controller backup systems.
- Pack of 1: Contains one battery assembly.
Siemens 575332TA Battery Specifications
| Specification | Details |
|---|---|
| Battery Reference | 575332TA |
| Nominal Voltage | 3V |
| Battery Type | Primary Lithium |
| Typical Battery Format | 1/2AA |
| Typical Replacement Capacity | 950mAh |
| Typical Chemistry | Lithium Manganese Dioxide |
| Connection | Two Wired Leads with Connector |
| Rechargeable | No |
| Application | Compatible PLC and CNC Backup Systems |
| Quantity | 1 Battery Assembly |
Typical replacement specifications are provided for identification. Confirm the exact specifications, capacity and connector polarity of the supplied battery before installation.
Common Applications
The 575332TA battery reference appears in replacement-battery catalogues for selected Siemens industrial systems.
These may include compatible:
- Siemens SIMATIC PLC controllers
- Siemens SINUMERIK CNC systems
- Siemens SIMOTION equipment
- Industrial controller memory-backup circuits
- Other equipment specifying a 575332TA battery or an approved equivalent
However, the correct battery depends on the controller’s exact model, revision and connector requirements.
Therefore, always compare the original battery assembly with the replacement before ordering.
Why Does a PLC or CNC Controller Need a Backup Battery?
Certain industrial control systems use backup batteries to support battery-backed memory functions when the normal power supply becomes unavailable.
For example, a controller may rely on a battery to retain designated memory data or configuration information.
Nevertheless, the precise function depends on the equipment design.
Consequently, follow the controller manufacturer’s maintenance instructions before replacing the battery.
Siemens 575332TA vs Ordinary 1/2AA Batteries
The 575332TA assembly is not simply an ordinary loose cylindrical battery.
In addition to the required voltage and chemistry, the replacement must match the equipment’s wiring and connector arrangement.
A standard 1/2AA cell without leads may not fit the intended installation.
Therefore, choose a battery assembly with the correct physical and electrical configuration.
Why Connector Polarity Matters
The battery’s connector must match the intended equipment.
Although two connectors may look similar, their wiring and polarity can differ.
Incorrect polarity can damage equipment or prevent the backup circuit from functioning correctly.
Before installation, compare the replacement’s positive and negative lead arrangement with the original approved battery.
Never rely only on wire colour or connector appearance.
Installation and Replacement Guidance
- Identify the original backup battery reference.
- Verify the equipment’s exact PLC or CNC model.
- Check the required voltage and battery chemistry.
- Compare connector shape, pin positions and polarity.
- Follow the manufacturer’s battery replacement instructions.
- Install the battery without short-circuiting its terminals.
- Verify the controller’s battery status after replacement.
Important: Incorrect battery replacement procedures may cause retained-data loss or industrial equipment downtime. Qualified maintenance personnel should perform the work according to the equipment manual.
Storage and Handling
Store the battery in a cool, dry environment away from conductive materials.
Furthermore, inspect the wires, connector and protective wrapping before use.
Do not install batteries with damaged insulation, loose terminals, swelling or leakage.
Important Battery Safety
- Never recharge a primary lithium battery.
- Do not short-circuit the connector contacts.
- Avoid crushing, puncturing or dismantling the cell.
- Keep away from excessive heat and fire.
- Never reverse the connection polarity.
- Do not use a damaged battery assembly.
- Keep away from children.
- Follow applicable battery disposal requirements.
Frequently Asked Questions
What is the Siemens 575332TA battery used for?
The 575332TA reference is associated with backup batteries for certain compatible industrial PLC and CNC controllers.
What voltage does it provide?
This battery reference commonly uses a nominal voltage of 3V.
What is the battery capacity?
Many compatible replacements use a 950mAh lithium cell. However, the supplied battery’s exact capacity requires verification.
Is the Siemens 575332TA battery rechargeable?
No. It uses non-rechargeable primary lithium battery technology.
Does it include a connector?
Yes. The pictured assembly includes connecting wires and a black connector.
Will it work with every Siemens PLC?
No. Compatibility depends on the specific controller and battery configuration.
Can I replace the battery while the PLC is powered off?
Follow the equipment manufacturer’s documented replacement procedure. Some controllers require specific precautions to protect retained data.
How many batteries are included?
Each order contains one battery assembly.
Buy Siemens 575332TA PLC Backup Battery Online at ArcEin
Order the Siemens 575332TA 3V Lithium PLC CNC Backup Battery with Connector from ArcEin for compatible industrial automation applications.
For bulk orders or assistance identifying the correct battery assembly, contact contactus@arcein.in.
Reviews
There are no reviews yet.